Collection: Solder Pots

26 products

Need a new industrial solder pot? We've got the widest selection of different size solder bath machines to handle any job you need to tackle. All of our standard electric solder melting pots for sale are capable of running leaded or lead-free alloys - no special crucible coating is required. For tinning wire choose a small solder pot; for dip soldering cable terminals or PCB's select an industrial solder pot larger than your part. Need to strip wire insulation? Choose one of our high-temperature solder melting pot machines capable of continuous operation above the insulation melting temperature. Custom solder pots are available - if you don't see the size that you need just send us your requirements.

Questions about Solder Pots

What is a solder pot used for?

A solder pot holds a bath of molten solder at a set temperature, so you can dip parts into it. It's used for tinning wire ends, dip soldering cable terminals and small parts, and removing through-hole parts near the edge of a circuit board. High-temperature pots can also strip the insulation off wire while they tin it. There's also a short article on keeping a pot in good shape.

What size solder pot do I need?

Pick a pot whose bath is bigger than the part you dip: a small pot for tinning wire ends, and a larger one for cable terminals and circuit boards. Our electric pots run from the American Beauty Mini Pot, with a bath 1 inch across, up to the Esico 80T, which is 6 by 12 inches. American Beauty and Esico are the same brand, and it's the one we prefer to sell.

Can I use lead-free solder in a solder pot?

Yes, as long as the pot runs hot enough for the alloy. Lead-free SAC305 melts at 423 to 430°F, and MacDermid Alpha, which makes it, recommends running it at 491 to 509°F in a wave solder pot. Every American Beauty and Esico pot we list goes above 600°F, and the Hakko FX-300 and FX-305 go above 800°F. Keep a separate pot for lead-free so the alloys don't mix. We also offer solder pot testing, and recommend it every quarter for high volume and every year for low volume.

Does a solder pot have temperature control?

Most of our solder pots have temperature control. The American Beauty D-300, D-900 and D-1400, the Esico PD24 and the Hakko FX-305 are digital, and they show both the temperature you set and the temperature in the pot. The Esico pots with a T in the model number and the American Beauty 300 and 600 have a thermostat, and the Hakko FX-300 has a dial. Whether a digital pot is worth it is covered here.

Can a solder pot melt lead?

Yes, if it runs above 621°F (327°C), where pure lead melts. For melting lead in bulk, such as for casting, the Johnson 200 gas pot holds 50 lb and is made for lead, babbitt, tin and zinc.